The 200 amp ats automatic transfer switch in power system is a key power switching and safety device in medium capacity power supply systems. It is mainly used to automatically switch electrical loads between the normal mains supply and a backup generator or alternate utility source, ensuring uninterrupted power for important equipment during power outages, voltage dips, phase loss, or other grid abnormalities.once the main power supply returns to normal, it can automatically or manually switch back to the original power supply.
| Item | Specification | |||
| Rated Current | 200A | |||
| Rated Voltage | Three-phase AC 220/380V,400/415V | |||
| Frequency | 50Hz/60Hz | |||
| Pole Configuration | 3P(3-phase 3-wire),4P(3-phase 4-wire with neutral switching) | |||
| Type | PC class(integral isolated type),CB class(dual circuit breaker type) | |||
| Transfer Time | ≤100ms(PC cass);100~500ms(CB class) | |||
| Control Mode | Auto,Manual,Remote Control | |||
| Mechanical Life | ≥8000~10000 operations | |||
| Protection Degree | IP20(indoor cabinet installation) | |||
The 200A capacity is moderate and suitable for small and medium-sized three-phase loads, with high cost performance.
It operates stably and has strong anti-interference ability, making it suitable for long-term continuous work.
It features a compact structure and easy installation, and can be directly installed in standard distribution cabinets.
It is suitable for scenarios with high requirements for continuous power supply.
Support: Quick response within 24 hours.Provide technical support for related technical issues by professional team.
Warranty period: The warranty period is 12 months from the date of receipt. During the warranty period, for core components damaged by non-human factors, replacement and repair services are provided.
Q:How can I ensure that the 200 amp ats automatic transfer switch in power system is compatible with my existing generator?
A:To ensure full compatibility between a 200A ATS and your generator, verify these key points:
● Match voltage, phase (3P/4P) and frequency (50/60Hz).
● Make sure the generator can supply at least 200A full load.
● Confirm the ATS can start/stop your generator via remote signal.
● Set a proper delay (3–10s) to let the generator stabilize before switching.
● Use correctly sized cables and ensure safe interlock to avoid back-feeding.
Q:Does it have relevant certifications?
A:Yes, our 200 amp ats automatic transfer switch in power system has relevant certifications such as CE, IEC, and ISO. It fully complies with international safety and quality standards.
Each product has been carefully packed with professional materials and standardized procedures, providing all-round protection to effectively prevent collisions, extrusion and wear, and fully ensure that the goods will not be damaged or deformed during long-distance transportation and handling.
Address
No. 391, Jingqi Road, Yanpan Industrial Zone, Yueqing City, Zhejiang Province, China
Tel
